C | Si | Mn | Cr | P | Ni+Co | Nb+Ta |
≤0.04 | ≤0.50 | ≤1.0 | 28.0-31.50 | ≤0.02 | Rem | ≤0.10 |
Al | Mo | Fe | Cu | S | Ti | Al+Ti |
≤1.10 | ≤0.50 | 7.0-11.0 | ≤0.30 | <0.015 | <1.0 | ≤1.50 |
Tensile Strength | 80,000 Psi | 552 MPA |
Elongation | 30-35% | |
Density g/cm3 | 8.19 g/cm3 | |
Melting Point ℃ | 1330-1380℃ | |
Electrical Resistivity μΩ-m | 1.148 |
Typical Welding Parameters | ||||
Process | Diameter | Voltage | Amperage | Gas |
TIG | .045” (1.2mm) | 13-16 | 80-110 | 100% Argon |
1/16” (1.6mm) | 14-18 | 90-130 | 100% Argon | |
3/32” (2.4mm) | 15-20 | 120-175 | 100% Argon | |
1/8” (3.2mm) | 15-20 | 150-220 | 100% Argon | |
MIG | .045” (1.2mm) | 28-32 | 180-220 | 75% Argon + 25% Helium |
1/16” (1.6mm) | 29-33 | 200-250 | 75% Argon + 25% Helium | |
SAW | 3/32” (2.4mm) | 28-30 | 275-350 | Suitable Flux may be used |
1/8” (3.2mm) | 29-32 | 350-450 | Suitable Flux may be used | |
5/32” (4.0mm) | 30-33 | 400-550 | Suitable Flux may be used |
Question2: Could you help to design the product?
Answer: Yes, we have excellent R&D team, OEM/ODM orders are all welcome.
Question: Could you supply samples?
Answer: Yes, wecould supply samples according to your requirement.
Question: could we visit your factory?
Answer: Sure, factory visit is warmly welcome.