It is widely used in industrial furnace, household appliances, industry furnace, metallurgy, machinery, aircraft, automotive, military and other industries producing heating elements and resistance elements.1. High service temperature, such as HRE (OCr24Al6Re Rhenium) iron-chromium-aluminum alloy wire, the maximum service temperature in the atmosphere can reach 1400 °C; 2. Long service life; 3. The allowable surface load is large; 4. Good anti-oxidation performance, the Al2O3 film formed after oxidation has good chemical resistance and high resistivity; 5. The specific gravity is smaller than that of nickel-chromium alloy; 6. High resistivity; 7. Good sulfur resistance; 8. The price is significantly lower than nickel-chromium alloy; 9. The disadvantage is that as the temperature rises, it shows plasticity, and the strength at high temperature is low.1.Raw material 2.Smelting 3.Drawing 4.Rolling 5.Annealing 6.Finished Product 7.Detection 8.Packing 9.ShippingNickel-chromium and nickel-chromium-iron resistance electric heating alloys have high resistivity, good surface oxidation resistance, high strength at high temperatures, good processability and weldability, and can be widely used in metallurgy and household Electrical appliances, machinery manufacturing, etc. as heating elements and electrical appliances as resistance materials.(1) It is forbidden to use for a long time over temperature and overload; (2) Rapid cooling is not allowed when the furnace temperature is 400°C; (3) Do not touch the electric furnace wire when loading and discharging; (4) When the furnace is working, always pay attention to whether the traffic lights on the control panel are normal, and the traffic lights should be replaced after a period of time during heat preservation, so as not to burn the electric furnace wire due to the failure of the control switch; (5) Pay attention to the working conditions of the instrument at any time, and analyze and deal with it in time when the furnace temperature and instrument indication are found to be abnormal; (6) For furnaces with a capacity of more than 100KW, it is best to install an ammeter for inspection in each heating zone, and an ammeter should be installed for each phase of the three-compartment high-temperature electric furnace.

Alloy Nomenclature Performance		1Cr13AL4	0Cr25Al5	0Cr21AL6	0Cr23Al5	0Cr21Al4	0Cr21Al6Nb	0Cr27Al7Mo2
Main Chemical composition	Cr	12.0-15.0	23.0-26.0	19.0-22.0	20.5-23.5	18.0-21.0	21.0-23.0	26.5-27.8
	Al	4.0-6.0	4.5-6.5	5.0-7.0	4.2-5.3	3.0-4.2	5.0-7.0	6.0-7.0
	Re	opportune	opportune	opportune	opportune	opportune	opportune	opportune
	Fe	Rest	Rest	Rest	Rest	Rest	Rest	Rest
							Nb0.5	Mo1.8-2.2
Max. continuous service temp. of element(°C)		950	1250	1250	1250	1100	1350	1400
Resistivity at 20ºC(μΩ·m)		1.25	1.42	1.42	1.35	1.23	1.45	1.53
Density(g/cm3)		7.4	7.1	7.16	7.25	7.35	7.1	7.1
Thermal conductivity(KJ/m·h·ºC)		52.7	46.1	63.2	60.2	46.9	46.1	--
Coefficient of lines expansion(α×10-6/ºC)		15.4	16	14.7	15	13.5	16	16
Melting point approx.( ºC)		1450	1500	1500	1500	1500	1510	1520
Tensile strength(N/mm2)		580-680	630-780	630-780	630-780	600-700	650-800	680-830
Elongation at rupture(%)		>16	>12	>12	>12	>12	>12	>10
Variation of area(%)		65-75	60-75	65-75	65-75	65-75	65-75	65-75
Repeat Bending frequency(F/R)		>5	>5	>5	>5	>5	>5	>5
Hardness(H.B.)		200-260	200-260	200-260	200-260	200-260	200-260	200-260
continuous service time(Hours/ ºC)		--	≥80/1300	≥80/1300	≥80/1300	≥80/1250	≥50/1350	≥50/1350
Micrographic structure		Ferrite	Ferrite	Ferrite	Ferrite	Ferrite	Ferrite	Ferrite
Magnetic properties		Magnetic	Magnetic	Magnetic	Magnetic	Magnetic	Magnetic	Magnetic

 Our company Principle is  " Quality first, Customer first". CHANGZHOU DLX ALLOY CO, LTD was established in 2002 and has got Iso9001 International Quality Management System Certificate and SGS Certificate. Our factory is professional in researching and producing special alloy material. From melting, drawing, heat treatment, finishing and testing .We offer nickel-based, copper-based, and iron-based alloys, including super alloy, welding materials, anti-corrosion alloy, precision alloy, FeCrAl alloy, NiCr alloy, CuNi alloy, thermocouple and Foam Metal etc, in the form of wire, strip, ribbon, bar, tube, plate1, We're able to design and develop the product what our customers require and meet their requirements through providing the appropriate engineering drawings or samples. 2, We can provide the products within a week after payment. 3, Wecan provide sample of the products customer need. 4, We always insist on "Quality first, Customer first" as our business philosophy.Question1: Are you a trading company or manufacturer? Answer: We're manufacturer. Question2:  Could you help to design the product? Answer:  Yes, we have excellent R&D team, OEM/ODM orders are all welcome.   Question3: Could you supply samples? Answer: Yes, wecould supply samples according to your requirement. Question4: could we visit your factory? Answer: Sure, factory visit is warmly welcome.